freeswitchforum.com

как в диал плане прописать входящий вызов с городского потока Е1 (номер +7495ххх хх хх) на внетренний sip номер 3003

читаем азы
http://wiki.freeswitch.org/wiki/Dialplan_XML
https://wiki.freeswitch.org/wiki/Misc._ ... ols_bridge

_________________
ЛС: @rostel
Сообщество: @ru_freeswitch

2014-03-24 14:56:26.521461 [NOTICE] ftmod_libpri.c:1930 -- Ring on channel 1:28 (from 1730 to 3001)
2014-03-24 14:56:26.521461 [NOTICE] switch_channel.c:1050 New Channel FreeTDM/1:28/3001 [b6e76d5c-0895-49be-a2a4-a84baf0056db]
2014-03-24 14:56:26.561445 [INFO] mod_dialplan_xml.c:558 Processing 1730 <1730>->3001 in context default
2014-03-24 14:56:26.701448 [INFO] ftmod_zt.c:661 Setting txgain to 3.000000 on channel 28
2014-03-24 14:56:26.701448 [INFO] ftmod_zt.c:673 Disable echo cancel for 1:28
2014-03-24 14:56:26.721448 [NOTICE] mod_dptools.c:1225 Channel [FreeTDM/1:28/3001] has been answered
2014-03-24 14:56:26.721448 [ERR] mod_conference.c:7618 Open of conference.conf failed
2014-03-24 14:56:26.721448 [NOTICE] switch_core_state_machine.c:262 FreeTDM/1:28/3001 has executed the last dialplan instruction, hanging up.
2014-03-24 14:56:26.721448 [NOTICE] switch_core_state_machine.c:264 Hangup FreeTDM/1:28/3001 [CS_EXECUTE] [NORMAL_CLEARING]
2014-03-24 14:56:26.761445 [NOTICE] switch_core_session.c:1577 Session 3 (FreeTDM/1:28/3001) Ended
2014-03-24 14:56:26.761445 [NOTICE] switch_core_session.c:1581 Close Channel FreeTDM/1:28/3001 [CS_DESTROY]



номер 1730 прописан на м200(е1 комутатор) и идет переадресация на freeswitch 30хх , то есть м200 настроен таким образом: временно выделен поток Е1 с коммутатора МР-16, порт 14, сигнализация DSS1, 30 каналов, CRC4 выключено.
В плане нумерации временно выделена 24-я абонентская сотня.
Вн. №№ с 2400 по 2499 подаются в поток, как 3000 --- 3099.
Временно выделен гор. ( № 499-503 хх хх ), в поток подается, как 3001.
При исх. связи все CLIP (АОН) 30ХХ заменяются на 24ХХ.

вот как то так ((( при вызове 3001ого абонента voip связи..... пинок под зад (((

_________________
ЛС: @rostel
Сообщество: @ru_freeswitch

freeswitch@freeswitch> 2014-03-24 16:46:56.281458 [NOTICE] ftmod_libpri.c:1930 -- Ring on channel 1:25 (from 1730 to 3001)
2014-03-24 16:46:56.281458 [NOTICE] switch_channel.c:1050 New Channel FreeTDM/1:25/3001 [f26de7c0-9454-4d8d-92a5-b327bf95f37c]
2014-03-24 16:46:56.321446 [INFO] mod_dialplan_xml.c:558 Processing 1730 <1730>->3001 in context default
2014-03-24 16:46:56.321446 [WARNING] mod_dialplan_xml.c:588 Context default not found
2014-03-24 16:46:56.321446 [INFO] switch_core_state_machine.c:192 No Route, Aborting
2014-03-24 16:46:56.321446 [NOTICE] switch_core_state_machine.c:193 Hangup FreeTDM/1:25/3001 [CS_ROUTING] [NO_ROUTE_DESTINATION]
2014-03-24 16:46:56.421444 [NOTICE] switch_core_session.c:1577 Session 3 (FreeTDM/1:25/3001) Ended
2014-03-24 16:46:56.421444 [NOTICE] switch_core_session.c:1581 Close Channel FreeTDM/1:25/3001 [CS_DESTROY]
2014-03-24 16:46:56.461444 [WARNING] ftdm_io.c:3022 [s1c25][1:25] Channel not opened, proceeding anyway


<extension name="outgoing-pri">
<condition field="destination_number" expression="^3001$">
<action application="bridge" data="sofia/sip/3001@$${location_1}"/>
</condition>
</extension>

./fs_cli
+OK log level [7]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < V(A)=67, V(S)=67, V(R)=31
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [ 02 01 3e 86 08 02 00 91 05 a1 04 03 80 90 a3 18 03 a9 83 9a 1e 02 81 83 6c 06 21 80 31 37 33 30 70 05 81 33 30 30 31 ]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Informational frame:
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < SAPI: 00 C/R: 1 EA: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 000 EA: 1
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(S): 031 0: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(R): 067 P: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < 35 bytes of data
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Protocol Discriminator: Q.931 (8) len=35
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent from originator)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Message Type: SETUP (5)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [a1]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Sending Complete (len= 1)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [04 03 80 90 a3]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability: Speech (0)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < User information layer 1: A-Law (35)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [18 03 a9 83 9a]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < ChanSel: As indicated in following octets
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Ext: 1 Coding: 0 Number Specified Channel Type: 3
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Ext: 1 Channel: 26 Type: CPE]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [1e 02 81 83]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [6c 06 21 80 31 37 33 30]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Calling Party Number (len= 8) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Presentation: Presentation allowed, User-provided, not screened (0) '1730' ]
0 31]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Called Party Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3001' ]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Got ACK for N(S)=67 to (but not including) N(S)=67
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- T200 requested to stop when not started
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] T203 requested to start without stopping first
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T203 timer
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Making new call for cref 145
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Received message for call 0x7f2c10009f10 on link 0x7f2c10000b20 TEI/SAPI 0/0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing Q.931 Call Setup
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing IE 161 (cs0, Sending Complete)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing IE 4 (cs0, Bearer Capability)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing IE 24 (cs0, Channel ID)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing IE 30 (cs0, Progress Indicator)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing IE 108 (cs0, Calling Party Number)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Processing IE 112 (cs0, Called Party Number)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:8646 post_handle_q931_message: Call 145 enters state 6 (Call Present). Hold state: Idle
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > V(A)=67, V(S)=67, V(R)=32
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ 02 01 01 40 ]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Supervisory frame:
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > SAPI: 00 C/R: 1 EA: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 000 EA: 1
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(R): 032 P/F: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 0 bytes of data
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Done handling message for SAPI/TEI=0/0
2014-03-24 16:49:25.261446 [NOTICE] ftmod_libpri.c:1930 -- Ring on channel 1:26 (from 1730 to 3001)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:1938 RING event with complete indicator (or overlap receive disabled)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:1939 [s1c26][1:26] Changed state from DOWN to RING
2014-03-24 16:49:25.261446 [DEBUG] ftdm_state.c:541 [s1c26][1:26] Executing state processor for RING
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:936 -- 1:26 STATE [RING]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:944 [s1c26][1:26] Completed state change from DOWN to RING in 0 ms
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:5704 q931_call_proceeding: Call 145 enters state 9 (Incoming Call Proceeding). Hold state: Idle
mod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > DL-DATA request
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Protocol Discriminator: Q.931 (8) len=10
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent to originator)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Message Type: CALL PROCEEDING (2)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] TEI=0 Transmitting N(S)=67, window is open V(A)=67 K=7
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > V(A)=67, V(S)=67, V(R)=32
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ 00 01 86 40 08 02 80 91 02 18 03 a9 83 9a ]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Informational frame:
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > SAPI: 00 C/R: 0 EA: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 000 EA: 1
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(S): 067 0: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(R): 032 P: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 10 bytes of data
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Protocol Discriminator: Q.931 (8) len=10
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent to originator)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Message Type: CALL PROCEEDING (2)
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [18 03 a9 83 9a]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > ChanSel: As indicated in following octets
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Ext: 1 Coding: 0 Number Specified Channel Type: 3
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Ext: 1 Channel: 26 Type: CPE]
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Stopping T203 timer
2014-03-24 16:49:25.261446 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T200 timer
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:2704 got clear channel sig [START]
2014-03-24 16:49:25.261446 [DEBUG] ftdm_io.c:3390 [s1c26][1:26] Enabled software DTMF detector
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:403 Set codec PCMA 20ms
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:1896 Connect inbound channel FreeTDM/1:26/3001
2014-03-24 16:49:25.261446 [NOTICE] switch_channel.c:1050 New Channel FreeTDM/1:26/3001 [0cbefd10-010f-45e1-b4a4-1f5797ef7890]
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:2099 (FreeTDM/1:26/3001) State Change CS_NEW -> CS_INIT
2014-03-24 16:49:25.261446 [DEBUG] switch_core_session.c:1351 Send signal FreeTDM/1:26/3001 [BREAK]
2014-03-24 16:49:25.261446 [DEBUG] switch_core_state_machine.c:415 (FreeTDM/1:26/3001) Running State Change CS_INIT
2014-03-24 16:49:25.261446 [DEBUG] switch_core_state_machine.c:455 (FreeTDM/1:26/3001) State INIT
_INIT -> CS_ROUTING
2014-03-24 16:49:25.261446 [DEBUG] switch_core_session.c:1351 Send signal FreeTDM/1:26/3001 [BREAK]
2014-03-24 16:49:25.261446 [DEBUG] switch_core_state_machine.c:455 (FreeTDM/1:26/3001) State INIT going to sleep
2014-03-24 16:49:25.261446 [DEBUG] switch_core_state_machine.c:415 (FreeTDM/1:26/3001) Running State Change CS_ROUTING
2014-03-24 16:49:25.261446 [DEBUG] switch_channel.c:2163 (FreeTDM/1:26/3001) Callstate Change DOWN -> RINGING
2014-03-24 16:49:25.261446 [DEBUG] switch_core_state_machine.c:471 (FreeTDM/1:26/3001) State ROUTING
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:453 FreeTDM/1:26/3001 CHANNEL ROUTING
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:456 [s1c26][1:26] Indicating PROCEED in state RING
2014-03-24 16:49:25.261446 [DEBUG] mod_freetdm.c:456 [s1c26][1:26] Changed state from RING to PROCEED
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < V(A)=67, V(S)=68, V(R)=32
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < T200_id=8192, N200=3, T203_id=0
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [ 00 01 01 88 ]
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Supervisory frame:
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < SAPI: 00 C/R: 0 EA: 0
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 000 EA: 1
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(R): 068 P/F: 0
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < 0 bytes of data
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Got ACK for N(S)=67 to (but not including) N(S)=68
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- ACKing N(S)=67, tx_queue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Stopping T200 timer
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T203 timer
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Done handling message for SAPI/TEI=0/0
2014-03-24 16:49:25.301448 [DEBUG] ftdm_state.c:541 [s1c26][1:26] Executing state processor for PROCEED
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:936 -- 1:26 STATE [PROCEED]
2014-03-24 16:49:25.301448 [DEBUG] ftmod_libpri.c:944 [s1c26][1:26] Completed state change from RING to PROCEED in 34 ms
2014-03-24 16:49:25.301448 [DEBUG] switch_core_state_machine.c:117 FreeTDM/1:26/3001 Standard ROUTING
2014-03-24 16:49:25.301448 [INFO] mod_dialplan_xml.c:558 Processing 1730 <1730>->3001 in context default
2014-03-24 16:49:25.301448 [WARNING] mod_dialplan_xml.c:588 Context default not found
2014-03-24 16:49:25.301448 [INFO] switch_core_state_machine.c:192 No Route, Aborting
2014-03-24 16:49:25.301448 [NOTICE] switch_core_state_machine.c:193 Hangup FreeTDM/1:26/3001 [CS_ROUTING] [NO_ROUTE_DESTINATION]
2014-03-24 16:49:25.301448 [DEBUG] switch_channel.c:3187 Send signal FreeTDM/1:26/3001 [KILL]
2014-03-24 16:49:25.301448 [DEBUG] switch_core_session.c:1351 Send signal FreeTDM/1:26/3001 [BREAK]
2014-03-24 16:49:25.301448 [DEBUG] switch_core_state_machine.c:471 (FreeTDM/1:26/3001) State ROUTING going to sleep
2014-03-24 16:49:25.301448 [DEBUG] switch_core_state_machine.c:415 (FreeTDM/1:26/3001) Running State Change CS_HANGUP
RINGING -> HANGUP
2014-03-24 16:49:25.301448 [DEBUG] switch_core_state_machine.c:680 (FreeTDM/1:26/3001) State HANGUP
2014-03-24 16:49:25.301448 [DEBUG] mod_freetdm.c:544 [1:26] FreeTDM/1:26/3001 CHANNEL HANGUP ENTER
2014-03-24 16:49:25.301448 [DEBUG] mod_freetdm.c:620 [s1c26][1:26] Changed state from PROCEED to HANGUP
2014-03-24 16:49:25.401453 [DEBUG] ftdm_state.c:541 [s1c26][1:26] Executing state processor for HANGUP
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:936 -- 1:26 STATE [HANGUP]
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:944 [s1c26][1:26] Completed state change from PROCEED to HANGUP in 104 ms
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:7135 q931_hangup: Hangup other cref:145
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:6892 __q931_hangup: ourstate Incoming Call Proceeding, peerstate Outgoing Call Proceeding, hold-state Idle
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:6081 q931_disconnect: Call 145 enters state 11 (Disconnect Request). Hold state: Idle
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > DL-DATA request
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Protocol Discriminator: Q.931 (8) len=9
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent to originator)
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Message Type: DISCONNECT (69)
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] TEI=0 Transmitting N(S)=68, window is open V(A)=68 K=7
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > V(A)=68, V(S)=68, V(R)=32
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ 00 01 88 40 08 02 80 91 45 08 02 81 83 ]
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Informational frame:
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > SAPI: 00 C/R: 0 EA: 0
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 000 EA: 1
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(S): 068 0: 0
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(R): 032 P: 0
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 9 bytes of data
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Protocol Discriminator: Q.931 (8) len=9
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent to originator)
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Message Type: DISCONNECT (69)
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [08 02 81 83]
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Ext: 1 Cause: No route to destination (3), class = Normal Event (0) ]
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Stopping T203 timer
2014-03-24 16:49:25.401453 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T200 timer
EXIT
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:48 FreeTDM/1:26/3001 Standard HANGUP, cause: NO_ROUTE_DESTINATION
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:680 (FreeTDM/1:26/3001) State HANGUP going to sleep
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:447 (FreeTDM/1:26/3001) State Change CS_HANGUP -> CS_REPORTING
2014-03-24 16:49:25.401453 [DEBUG] switch_core_session.c:1351 Send signal FreeTDM/1:26/3001 [BREAK]
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:415 (FreeTDM/1:26/3001) Running State Change CS_REPORTING
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:764 (FreeTDM/1:26/3001) State REPORTING
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:92 FreeTDM/1:26/3001 Standard REPORTING, cause: NO_ROUTE_DESTINATION
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:764 (FreeTDM/1:26/3001) State REPORTING going to sleep
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:441 (FreeTDM/1:26/3001) State Change CS_REPORTING -> CS_DESTROY
2014-03-24 16:49:25.401453 [DEBUG] switch_core_session.c:1351 Send signal FreeTDM/1:26/3001 [BREAK]
2014-03-24 16:49:25.401453 [DEBUG] switch_core_session.c:1559 Session 4 (FreeTDM/1:26/3001) Locked, Waiting on external entities
2014-03-24 16:49:25.401453 [NOTICE] switch_core_session.c:1577 Session 4 (FreeTDM/1:26/3001) Ended
2014-03-24 16:49:25.401453 [NOTICE] switch_core_session.c:1581 Close Channel FreeTDM/1:26/3001 [CS_DESTROY]
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:566 (FreeTDM/1:26/3001) Callstate Change HANGUP -> DOWN
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:569 (FreeTDM/1:26/3001) Running State Change CS_DESTROY
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:579 (FreeTDM/1:26/3001) State DESTROY
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:99 FreeTDM/1:26/3001 Standard DESTROY
2014-03-24 16:49:25.401453 [DEBUG] switch_core_state_machine.c:579 (FreeTDM/1:26/3001) State DESTROY going to sleep
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < V(A)=68, V(S)=69, V(R)=32
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < T200_id=8192, N200=3, T203_id=0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [ 00 01 01 8a ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Supervisory frame:
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < SAPI: 00 C/R: 0 EA: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 000 EA: 1
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(R): 069 P/F: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < 0 bytes of data
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Got ACK for N(S)=68 to (but not including) N(S)=69
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- ACKing N(S)=68, tx_queue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Stopping T200 timer
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T203 timer
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Done handling message for SAPI/TEI=0/0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
[1:16] < TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < V(A)=69, V(S)=69, V(R)=32
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [ 02 01 40 8a 08 02 00 91 4d ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Informational frame:
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < SAPI: 00 C/R: 1 EA: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 000 EA: 1
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(S): 032 0: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(R): 069 P: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < 5 bytes of data
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Protocol Discriminator: Q.931 (8) len=5
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent from originator)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Message Type: RELEASE (77)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Got ACK for N(S)=69 to (but not including) N(S)=69
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- T200 requested to stop when not started
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] T203 requested to start without stopping first
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T203 timer
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Received message for call 0x7f2c10009f10 on link 0x7f2c10000b20 TEI/SAPI 0/0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:8997 post_handle_q931_message: Call 145 enters state 0 (Null). Hold state: Idle
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > V(A)=69, V(S)=69, V(R)=33
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ 02 01 01 42 ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Supervisory frame:
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > SAPI: 00 C/R: 1 EA: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 000 EA: 1
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(R): 033 P/F: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 0 bytes of data
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Done handling message for SAPI/TEI=0/0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:1454 -- Hangup on channel 1:26
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:7135 q931_hangup: Hangup other cref:145
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:6892 __q931_hangup: ourstate Null, peerstate Release Request, hold-state Idle
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > DL-DATA request
.c:134 [s1c16][1:16] > Protocol Discriminator: Q.931 (8) len=9
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent to originator)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Message Type: RELEASE COMPLETE (90)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] TEI=0 Transmitting N(S)=69, window is open V(A)=69 K=7
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > V(A)=69, V(S)=69, V(R)=33
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > T200_id=0, N200=3, T203_id=8192
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [ 00 01 8a 42 08 02 80 91 5a 08 02 81 83 ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Informational frame:
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > SAPI: 00 C/R: 0 EA: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI: 000 EA: 1
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(S): 069 0: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > N(R): 033 P: 0
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 9 bytes of data
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Protocol Discriminator: Q.931 (8) len=9
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > TEI=0 Call Ref: len= 2 (reference 145/0x91) (Sent to originator)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Message Type: RELEASE COMPLETE (90)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [08 02 81 83]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > Ext: 1 Cause: No route to destination (3), class = Normal Event (0) ]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Stopping T203 timer
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T200 timer
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:7135 q931_hangup: Hangup other cref:145
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] q931.c:6892 __q931_hangup: ourstate Null, peerstate Null, hold-state Idle
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Destroying call 0x7f2c10009f10, ourstate Null, peerstate Null, hold-state Idle
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:1473 [s1c26][1:26] Changed state from HANGUP to HANGUP_COMPLETE
2014-03-24 16:49:25.441450 [DEBUG] ftdm_state.c:541 [s1c26][1:26] Executing state processor for HANGUP_COMPLETE
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:936 -- 1:26 STATE [HANGUP_COMPLETE]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:944 [s1c26][1:26] Completed state change from HANGUP to HANGUP_COMPLETE in 0 ms
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:1260 [s1c26][1:26] Changed state from HANGUP_COMPLETE to DOWN
2014-03-24 16:49:25.441450 [DEBUG] ftdm_state.c:541 [s1c26][1:26] Executing state processor for DOWN
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:936 -- 1:26 STATE [DOWN]
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:944 [s1c26][1:26] Completed state change from HANGUP_COMPLETE to DOWN in 0 ms
2014-03-24 16:49:25.441450 [WARNING] ftdm_io.c:3022 [s1c26][1:26] Channel not opened, proceeding anyway
freeswitch@internal> 14-03-24 16:49:25.441450 [DEBUG] ftdm_io.c:3189 [s1c26][1:26] DTMF debug is already disabled
2014-03-24 16:49:25.441450 [DEBUG] ftdm_io.c:3221 [s1c26][1:26] No need to disable input dump
2014-03-24 16:49:25.441450 [DEBUG] ftdm_io.c:3252 [s1c26][1:26] No need to disable output dump
2014-03-24 16:49:25.441450 [DEBUG] mod_freetdm.c:2704 got clear channel sig [RELEASED]
2014-03-24 16:49:25.441450 [DEBUG] ftdm_io.c:6786 Cleared call with id 4
2014-03-24 16:49:25.441450 [DEBUG] ftdm_io.c:2994 [s1c26][1:26] channel done
2014-03-24 16:49:25.441450 [DEBUG] ftmod_libpri.c:972 -- Closed channel 1:26
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 0 State 7(Multi-frame established)
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < V(A)=69, V(S)=70, V(R)=33
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < T200_id=8192, N200=3, T203_id=0
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < [ 00 01 01 8c ]
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Supervisory frame:
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < SAPI: 00 C/R: 0 EA: 0
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < TEI: 000 EA: 1
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < N(R): 070 P/F: 0
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] < 0 bytes of data
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Got ACK for N(S)=69 to (but not including) N(S)=70
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- ACKing N(S)=69, tx_queue head is N(S)=-1 (-1 is empty, -2 is not transmitted)
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Stopping T200 timer
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] -- Starting T203 timer
2014-03-24 16:49:25.481426 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] Done handling message for SAPI/TEI=0/0
/exit

_________________
ЛС: @rostel
Сообщество: @ru_freeswitch

2014-03-24 16:49:25.301448 [INFO] mod_dialplan_xml.c:558 Processing 1730 <1730>->3001 in context default
2014-03-24 16:49:25.301448 [WARNING] mod_dialplan_xml.c:588 Context default not found
2014-03-24 16:49:25.301448 [INFO] switch_core_state_machine.c:192 No Route, Aborting

это то я вижу ... а что с этим делать непойму.... помогите прописать в диал плане чтобы правильно передавался вызов с 1730 на 30хх плиз

в файл /usr/local/freeswitch/conf/dialplan/to_internal.xml

_________________
ЛС: @rostel
Сообщество: @ru_freeswitch

благодарю!